- Description
- Performance
Description
Aseptomag® single-seat control valves are used for the exact setting and control of parameters such as flow, pressure, temperature, or filling level in aseptic processing plants.
An electro-pneumatic positioner enables the exact setting of the valve stem by controlling the pneumatic actuator. A welded stainless steel bellows is used to hermetically seal the product area from outside contamination. This special design and the durable valve seat seal, made of Tefasep®, enables optimum process and product safety.
Main Components
Housing
Housings for control valves are available with either two or three port connections. The valves are produced with standard butt-weld connections by default. Mixed port connection sizes as well as various aseptic pipe connections are available upon request.
Internal Assembly
The internal assembly is available with or without a shrunk or screwed valve seat seal. In addition to the standard sealing material Tefasep®, other material options such as PTFE and EPDM are also available. The control cone is designed as equal-percentage by default.
Actuator
The standard version of the pneumatic actuator is designed as spring-closing / air-opening (NC). Alternatively, an air-closing / spring-opening (NO) option is available.
Clamp
Due to its solid construction, the GEA clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions.
Positioner / Process Controller
Aseptic control valves are usually equipped with a closed centralized positioner (GRZ) mounted directly on top of the valve by a specifically designed adaptor. Depending on process requirements, it is also possible to apply a process controller instead. Other control options are available upon request.
Pump Size | Theoretical Displacement |
Nominal Connection Size |
Max Diff. Pressure |
Max Speed |
Max Temp | |||||
---|---|---|---|---|---|---|---|---|---|---|
Litre/rev | Imp. Gal/ 100 rev |
US gal/ 100 rev |
mm | inches | bar | psi | rev/ min |
°C | °F | |
SLAS | .039 | .86 | 1.03 | 19 | 3/4″ | 15 | 218 | 1400 | 150 | 300 |
SLAL | .059 | 1.30 | 1.56 | 25 | 1″ | 10 | 145 | 1400 | 150 | 300 |
SLBS | .081 | 1.78 | 2.14 | 25 | 1″ | 15 | 218 | 1200 | 150 | 300 |
SLBL | .122 | 2.68 | 3.22 | 38 | 1 1/2″ | 10 | 145 | 1200 | 150 | 300 |
SLCS | .169 | 3.72 | 4.46 | 38 | 1 1/2″ | 15 | 218 | 1200 | 150 | 300 |
SLCL | .254 | 5.59 | 6.71 | 50 | 2″ | 10 | 145 | 1200 | 150 | 300 |
SLDS | .352 | 7.74 | 9.30 | 38 | 1 1/2″ | 15 | 218 | 1000 | 150 | 300 |
SLDL | .528 | 11.61 | 13.95 | 50 | 2″ | 10 | 145 | 1000 | 150 | 300 |
SLES | .732 | 16.10 | 19.34 | 50 | 2″ | 15 | 218 | 800 | 150 | 300 |
SLEL | 1.099 | 24.18 | 29.03 | 76 | 3″ | 10 | 145 | 800 | 150 | 300 |
SLFS | 1.524 | 33.52 | 40.26 | 76 | 3″ | 15 | 218 | 600 | 150 | 300 |
SLFL | 2.285 | 50.26 | 60.36 | 101 | 4″ | 10 | 145 | 600 | 150 | 300 |
SLGS | 3.17 | 69.73 | 83.74 | 101 | 4″ | 15 | 218 | 600 | 150 | 300 |
SLGL | 4.754 | 104.58 | 125.59 | 152 | 6″ | 10 | 145 | 600 | 150 | 300 |