- Description
- Performance
Description
Flowtrend Replacement for the Tri-Clover® 361 Seat Valve
Air-operated seat valve featuring the positive action of a short-stroke actuator with heavy-duty clamps and precision-molded bonnet gaskets
Remote controlled by compressed air
Sanitary, flexible design can be used as a stop valve with 2 – 3 ports or as a divert valve with 3 – 5 ports
Simple moveable parts mean reliability
Intended to be interchangeable with OEM.
Suitable For
High-volume sanitary liquid processing systems where correct alignment of a clean-in-place valve must be maintained under severe operating conditions.
Features
Open yoke with visible valve stem coupler
Single O-ring stem design, allows o-ring and stem groove to be cleaned and sanitized
Valve porting is flush with the bottom surface to ensure full drainage of the valve body
Highly polished wetted areas eliminate crevices that can trap and harbor bacteria
Operates in temperatures of up to 285 ° (EPDM)
Repairable actuator
Standard stock item
Materials
Product wetted steel surfaces: Stainless steel AISI 316L |
Finish: 32 Ra Standard ID |
Plug stem: LP bonded Buna® or “TR” (PTFE replaceable) |
Product wetted seals: NBR |
Other seals: Buna |
Product connections: Clamp and Butt Weld |
Flowtrend® is the manufacturer of these OEM replacement parts. Flowtrend® is not sponsored by, affiliated with, connected with, and does not represent or otherwise have any endorsement from the OEM manufacturers.
Any name, model, part number, brand, image, material, or referral is for descriptive purposes only. Flowtrend’s parts or products are not Alfa Laval parts or products, and Alfa Laval does not endorse, approve or warrant
Flowtrend’s parts or products or their use.
Pump Size | Theoretical Displacement |
Nominal Connection Size |
Max Diff. Pressure |
Max Speed |
Max Temp | |||||
---|---|---|---|---|---|---|---|---|---|---|
Litre/rev | Imp. Gal/ 100 rev |
US gal/ 100 rev |
mm | inches | bar | psi | rev/ min |
°C | °F | |
SLAS | .039 | .86 | 1.03 | 19 | 3/4″ | 15 | 218 | 1400 | 150 | 300 |
SLAL | .059 | 1.30 | 1.56 | 25 | 1″ | 10 | 145 | 1400 | 150 | 300 |
SLBS | .081 | 1.78 | 2.14 | 25 | 1″ | 15 | 218 | 1200 | 150 | 300 |
SLBL | .122 | 2.68 | 3.22 | 38 | 1 1/2″ | 10 | 145 | 1200 | 150 | 300 |
SLCS | .169 | 3.72 | 4.46 | 38 | 1 1/2″ | 15 | 218 | 1200 | 150 | 300 |
SLCL | .254 | 5.59 | 6.71 | 50 | 2″ | 10 | 145 | 1200 | 150 | 300 |
SLDS | .352 | 7.74 | 9.30 | 38 | 1 1/2″ | 15 | 218 | 1000 | 150 | 300 |
SLDL | .528 | 11.61 | 13.95 | 50 | 2″ | 10 | 145 | 1000 | 150 | 300 |
SLES | .732 | 16.10 | 19.34 | 50 | 2″ | 15 | 218 | 800 | 150 | 300 |
SLEL | 1.099 | 24.18 | 29.03 | 76 | 3″ | 10 | 145 | 800 | 150 | 300 |
SLFS | 1.524 | 33.52 | 40.26 | 76 | 3″ | 15 | 218 | 600 | 150 | 300 |
SLFL | 2.285 | 50.26 | 60.36 | 101 | 4″ | 10 | 145 | 600 | 150 | 300 |
SLGS | 3.17 | 69.73 | 83.74 | 101 | 4″ | 15 | 218 | 600 | 150 | 300 |
SLGL | 4.754 | 104.58 | 125.59 | 152 | 6″ | 10 | 145 | 600 | 150 | 300 |