Sani-Flow Homogenizer Pressure Gauges
316L Stainless Steel Wetted Surfaces
304 Stainless Steel Case
Lexan® Lens
- Description
- Performance
Description
More than 30 years of experience in designing and building sanitary pressure gauges has gone into engineering an exceptional gauge designed specifically for homogenizer applications. Internal dampening means little or no pointer oscillations and much longer gauge life. Like the rest of our products, the homogenizer gauge was conceived with accuracy, durability and low cost of maintenance in mind. The gauge is available in pressure ranges from 1,000 psi up to 15,000 psi, with or without the 2 bolt flange. The Sani-Flow homogenizer pressure gauge is delivered from stock in just about any configuration.
Pump Size | Theoretical Displacement |
Nominal Connection Size |
Max Diff. Pressure |
Max Speed |
Max Temp | |||||
---|---|---|---|---|---|---|---|---|---|---|
Litre/rev | Imp. Gal/ 100 rev |
US gal/ 100 rev |
mm | inches | bar | psi | rev/ min |
°C | °F | |
SLAS | .039 | .86 | 1.03 | 19 | 3/4″ | 15 | 218 | 1400 | 150 | 300 |
SLAL | .059 | 1.30 | 1.56 | 25 | 1″ | 10 | 145 | 1400 | 150 | 300 |
SLBS | .081 | 1.78 | 2.14 | 25 | 1″ | 15 | 218 | 1200 | 150 | 300 |
SLBL | .122 | 2.68 | 3.22 | 38 | 1 1/2″ | 10 | 145 | 1200 | 150 | 300 |
SLCS | .169 | 3.72 | 4.46 | 38 | 1 1/2″ | 15 | 218 | 1200 | 150 | 300 |
SLCL | .254 | 5.59 | 6.71 | 50 | 2″ | 10 | 145 | 1200 | 150 | 300 |
SLDS | .352 | 7.74 | 9.30 | 38 | 1 1/2″ | 15 | 218 | 1000 | 150 | 300 |
SLDL | .528 | 11.61 | 13.95 | 50 | 2″ | 10 | 145 | 1000 | 150 | 300 |
SLES | .732 | 16.10 | 19.34 | 50 | 2″ | 15 | 218 | 800 | 150 | 300 |
SLEL | 1.099 | 24.18 | 29.03 | 76 | 3″ | 10 | 145 | 800 | 150 | 300 |
SLFS | 1.524 | 33.52 | 40.26 | 76 | 3″ | 15 | 218 | 600 | 150 | 300 |
SLFL | 2.285 | 50.26 | 60.36 | 101 | 4″ | 10 | 145 | 600 | 150 | 300 |
SLGS | 3.17 | 69.73 | 83.74 | 101 | 4″ | 15 | 218 | 600 | 150 | 300 |
SLGL | 4.754 | 104.58 | 125.59 | 152 | 6″ | 10 | 145 | 600 | 150 | 300 |